200 series filters
D.P.I. has a wide range of dust, gas and combined filters: series 200 (to be used in pairs), series 230 and DIRIN (with threaded connector EN 148/1). The series 200 include particulate, gas and combined filters in a synthetic resin container built with special screw in connector for use with half mask POLIMASK® 100/2, POLIMASK® Beta, or C607/TWIN full face mask.
Dust filters meet EN 143:2000+A1:2006, gas and combined filters meet EN 14387:04 + A1:2008.
Dust filters comply with the standard EN 143, gas and combined filters with EN 14387. All dust and combined filters with P2 and P3 are marked with R (reusable) and D (dolomite tested).
7,11€ – 15,91€
Information
Documentation
Information
The 200 series consists of aerosol, gas and combination filters with synthetic resin housings equipped with special threaded coupling.
PARTICULATE FILTERS
• Class P2 and P3 particulat e filters comply with EN 1 43 and there fore with the local European countries standards when used in pairs and have a filtering efficiency greater than that required by current standards.
GAS FILTERS
• They contain granular activated carbon that chemically and/or physically blocks contaminating gases and vapors.
COMBINED FILTERS
• Comply with EN 14387 and therefore with the local European countries standards when used in pairs. The combined filter gives excellent protection from both gas and particles (dust, fumes and mists).
N.B. For selection of the most suitable type of filter for use, see the Filter Selection Guide.
• Filters should not be used in environments with oxygen concentration below 18% by volume and in the presence of gases and/or vapors other than those expressly indicated.
Documentation
