Filters 230 series
D.P.I. has a wide range of dust, gas and combined filters: Series 230 filters have a special fitting. They can be used with the POLIMASK® 230 half-mask, POLIMASK® 2000 Gamma, and via the 230 fitting (code 4201.0600) equipped with an EN 148/1-threaded nozzle-they can be used with POLIMASK® 330 half-masks or C607, SELECTA, SFERA, IDEA and C701 full-face masks.
Dust filters meet EN 143:2000+A1:2006, gas and combined filters meet EN 14387:04 + A1:2008.
Dust filters comply with the standard EN 143, gas and combined filters with EN 14387. All dust and combined filters with P2 and P3 are marked with R (reusable) and D (dolomite tested).
7,96€ – 32,04€
Information
Documentation
Information
The 230 series is made up of aerosol, gas and combined filters, with highly resistant synthetic resin housings.
PARTICULATE FILTERS
• Class P2 and P3 particulat e filters comply with EN 1 43 and there fore with the local European countries standards when used in pairs and have a filtering efficiency greater than that required by current standards.
GAS FILTERS
• They contain granular activated carbon that chemically and/or physically blocks contaminating gases and vapors.
COMBINED FILTERS
• Comply with EN 14387 and therefore with the local European countries standards when used in pairs. The combined filter gives excellent protection from both gas and particles (dust, fumes and mists).
N.B. For selection of the most suitable type of filter for use, see the Filter Selection Guide.
• Filters should not be used in environments with oxygen concentration below 18% by volume and in the presence of gases and/or vapors other than those expressly indicated.
PARTICULATE FILTERS
• Class P2 and P3 particulat e filters comply with EN 1 43 and there fore with the local European countries standards when used in pairs and have a filtering efficiency greater than that required by current standards.
GAS FILTERS
• They contain granular activated carbon that chemically and/or physically blocks contaminating gases and vapors.
COMBINED FILTERS
• Comply with EN 14387 and therefore with the local European countries standards when used in pairs. The combined filter gives excellent protection from both gas and particles (dust, fumes and mists).
N.B. For selection of the most suitable type of filter for use, see the Filter Selection Guide.
• Filters should not be used in environments with oxygen concentration below 18% by volume and in the presence of gases and/or vapors other than those expressly indicated.
Documentation
